陶瓷原料深加工

产品说明


工艺介绍 Process introduction

————————————————


该系统为将原料破碎后再进行水洗:

1、根据原来的易磨性,软质料直接破碎后入仓待用,硬质料破碎后再进入水洗工艺2、原料破碎一般采用鄂破、圆锥破、对辊破碎。

3、硬质料水洗工艺:破碎后原料进入连续式球磨机研磨后,经永磁除铁及立环除铁,再经脱水筛筛分成成品及浆料,浆料再经榨泥机压榨成泥,脱水后的成品及压榨泥均可作陶瓷原料。


The system involves crushing raw materials before washing them with water:

1. According to the original grindability, soft materials are directly crushed and stored for use; The hard material is crushedbefore entering the water washing process.

2. Raw material crushing generally adopts jaw crushing, cone crushing, and roller crushing

3. Hard material washing process: After crushing, the raw material enters a continuous ball mil for grinding. undercoespermanent magnet iron removal and vertical ring iron removal, and is then separated into fnished products and slurrythrough a dehydration screen. The slurry is then pressed into mud by a mud press, and the dehydrated fnished product anopressed mud can be used as ceramic raw materials.


矿用设备转曲-3.jpg


联系我们

联系电话:0595-86838889(蔡先生)

               0595-86882521

Q Q:3178024880

企业邮箱:fjminjie@163.com

公司地址:福建省南安市官桥镇林边工业区